Whole-Home Repiping in Barrie & Orillia
Old pipes do not get better with time. Low pressure, rusty water, pinhole leaks and Poly-B lines are all signs the pipe itself is done. We replace every water line in the home, in your choice of PEX-B, PEX-A or press-fit copper, and you pick from three written options before any work starts.
When the Pipe Is the Problem
A repipe replaces every water supply line in your home: the hot and cold lines feeding every tap, toilet, shower and appliance. It is the fix for problems that keep coming back no matter how many single leaks get patched.
Most of the homes we repipe in Barrie and Orillia have one of three things going on: galvanized or copper lines at the end of their life, repeated pinhole leaks, or Poly-B pipe, the grey plastic line installed in thousands of Ontario homes from the late 1970s to the mid 1990s.
Signs Your Home Needs a Repipe
- Pinhole leaks that keep coming back in new spots
- Rust-coloured or metallic-tasting water
- Water pressure that has faded year over year
- Grey Poly-B pipe anywhere in the house
- Green corrosion on copper lines and fittings
- A home built before 1995 that has never been repiped
What a Repipe Includes
- Every hot and cold water line replaced, from the main shut-off to every fixture.
- Your choice of PEX-B, PEX-A or press-fit copper, priced as three written options before you commit.
- All fixtures tested and running before we leave, and a building permit pulled when the job needs one.
How the Job Goes
Free estimate
We look at your pipe material, count the fixtures, and check access. You get three written options: Good in PEX-B, Better in PEX-A, Best in press-fit copper. You pick the one that fits.
The repipe
New lines run through the house with as few openings as we can manage. Water is back on the same day in most homes, and any drywall we open is left ready for patching.
Tested and warranted
Every fixture is tested and running before we leave, and the work carries our one-year workmanship warranty.
What a Repipe Costs
Guide ranges by home size, for a full whole-home repipe: a small home under 1,500 sq ft guides at $5,175 to $9,050; a medium home of 1,500 to 2,500 sq ft guides at $10,350 to $19,400; a large home over 2,500 sq ft guides at $15,525 to $25,875. A partial repipe, one bathroom or kitchen, guides at $3,260 to $6,475.
Material moves the number inside that range. PEX-B is the budget option, PEX-A is what most homeowners pick, and press-fit copper is the premium line. Your free estimate prices all three for your exact house, in writing, and the pick is yours.
The Poly-B problem deserves its own word. Poly-B is the pipe insurers ask about by name. It gets brittle from the inside, and when it lets go it tends to go all at once, not with a slow drip you can plan around. Some insurers charge more to cover a Poly-B home, and some will not cover water damage from it at all. If your home has grey plastic water lines stamped PB2110, that is Poly-B. Replacing it before it fails is a planned job with a written price. Replacing it after is an emergency plus a renovation.
Priced in the Open, Before You Book
Every Concepts Plumbing service is priced in our online cost calculator, with the published market guide range shown up front.*
Check your estimated price range here.
We Also Specialize In…
Pipe Installation
New water lines for additions, rough-ins and replacements, run and tested properly the first time.
Learn more →Plumbing Pipe Repair
A single leak or one bad section does not always need a whole repipe. We repair what is worth repairing and tell you honestly when it is not.
Learn more →Water Heater Installation
Tank and tankless installation, sized to your household — we explain both options honestly at your free estimate.
Learn more →Questions We Hear
How long does a whole-home repipe take?
Most homes are done in one to two days, and the water is back on each day before we leave. Larger homes and full copper jobs can take longer; your estimate will say exactly.
Do I have Poly-B?
Look in your basement or utility room for grey plastic pipe stamped PB2110. If you find it, that is Poly-B. If you are not sure what you are looking at, send us a photo or book a free estimate and we will identify it.
Will a repipe tear up my walls?
We open only what we need to reach the lines, and we plan routes through closets, basements and attic spaces first. Openings are left ready for patching; drywall and paint restoration are not included.
Does a repipe include the drains?
No. A repipe covers the water lines that feed your fixtures. Drain and sewer lines are a separate system and are priced separately if they need work.
Is a permit needed?
When the job needs one, we pull the building permit and the fee passes through at cost, with no markup.
Didn’t find the answer you are looking for? Contact Us
Book Your Free Estimate
Book a free estimate and we will price all three materials for your home, in writing.
Not seeing the calendar? Open the booking page or call (705) 715-1513.
Need a Plumber in Barrie or Orillia?
Book your free estimate online in under a minute, or call and speak with our team — day or night.